Certified Certification
Certified Certification
Exciting Deal on Inconel Pipe, Fitting, Flanges & Hastelloy Pipe, Fittings, Flanges,     Inconel 625 Pipes / Monel 400 Pipes Hastelloy C276 Pipe Stockist in INDIA,
About Us

ASTM B462 ALLOY20 45/90 DEGREE ELBOW FORGED FITTINGS

Alloy 20 Elbow 45/90 Degree Forged Fittings is a particular standard band pre-created designed pipe connector or pipe joint. It is intended to be flanged, screwed or welded. We produce all the Alloy 45/90 Degree forged elbows in fluctuated size, measurement and grade. These elbows are utilized to alter the course of certain funneling or piping framework. We create and send out amazing piping fittings. You can purchase ANSI/ASME B16.9 Alloy 20 Forged 45/90 degree elbow.

We have earned reputed name in making of ASTM B462 Alloy 20 Forged Fittings , Alloy 20 Forged Elbow 45/90 Degree Forged Fittings, which is constructed with the best of the materials available in the market. Alloy 20 and alloy steel are employed for fabricating this Elbow 45/90 Degree. Alloy 20 forged 45/90 Degree Elbow roll out a 45°/90° improvement of course in the keep running of the pipe.

The Alloy 20 forged 45/90 degree forged elbows is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. ASTM B462 Alloy 20 Forged Fittings and Alloy 20 forged elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the forged elbows is a major dimension of the pipe. A pipe's outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter's (ID) bore size that is reduced as the schedule or wall thickness increases. These forged fittings are available in other grade, material and standards such as stainless steel 45/90 degree elbow forged fittings , monel forged fittings, inconel forged fittings and much more.

Specifications

Type: Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT
Form: 45 Deg Elbow, 90 Deg Elbow, Forged Elbow, Threaded Elbow, Socket Weld Elbow.
Materials: Alloy20
ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Dimension : ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25

Dimensions

Diagram

Dimensions NPS 1/2 to 4 - 45° - Class 3000

NPS Socket
Bore
Depth
Socket
Bore
DIA
Socket
WT
Body
WT
B J D C G
1/2 21.95
21.70
10 16.6
15
4.65
4.10
3.75
3/4 27.30
27.05
13 21.7
20.2
4.90
4.25
3.90
1 34.05
33.80
13 27.4
25.9
5.70
5.00
4.55
42.80
42.55
13 35.8
34.3
6.05
5.30
4.85
48.90
48.65
13 41.7
40.1
6.35
5.55
5.10
2 61.35
61.10
16 53.5
51.7
6.95
6.05
5.55
74.20
73.80
16 64.2
61.2
8.75
7.65
7.00
3 90.15
89.80
16 79.5
46.4
9.50
8.30
7.60
4 115.80
115.45
19 103.8
100.7
10.70
9.35
8.55
NPS B J D C G
Socket
Bore
Depth
Socket
Bore
DIA
Socket
WT
Body
WT
NPS Center to bottom of socket A
45°
1/2 11.5
3/4 12.5
1 14
17
21
2 25
29
3 31.5
4 41.5
NPS 45°
Center to bottom of socket A

Dimensions NPS 1/2 to 2 - 45° - Class 6000

NPS Socket
Bore
Depth
Socket
Bore
DIA
Socket
WT
Body
WT
B J D C G
1/2 21.95
21.70
10 12.5
11
5.95
5.20
4.80
3/4 27.30
27.05
13 16.3
14.8
6.95
6.05
5.55
1 34.05
33.80
13 21.5
19.9
7.90
6.95
6.35
42.80
42.55
13 30.2
28.7
7.90
6.95
6.35
48.90
48.65
13 34.7
33.2
8.90
7.80
7.15
2 61.35
61.10
16 43.6
42.1
10.90
9.50
8.75
NPS B J D C G
Socket
Bore
Depth
Socket
Bore
DIA
Socket
WT
Body
WT
NPS Center to bottom of socket A
45°
1/2 12.5
3/4 14.5
1 17
21
25
2 29
NPS 45°
Center to bottom
of socket
A

Uses & Application

Chemical Oil Mills Petrochemical Mining
Fertilizers Shipbuilding Power Plant Steel Plant
Oil & Gas Defence Paper Ports
Cement Engineering Co. Sugar Government Org. etc.

Why Choose Us

  • You can get the perfect material according to your requirement at the least possible price.
  • We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
  • We have 30+years of experience in this field as we serve the highest level of quality.
  • The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
  • e guarantee to give a response within 24hours(usually in the same hour)
  • You can get stock alternatives, mill deliveries with minimizing manufacturing time.
  • We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Documents presented by us

  • Commercial Invoice consisting HS code
  • Material examination records as per EN 10204 3.1, EN 10204 3.2
  • Certificate of foundation legalized/attested by chamber of commerce or delegation
  • We provide guarantee latter.
  • Packing details such as number of boxes, net weight and gross weight, marks and numbers
  • Laboratory examined reports sanctioned by NABL
  • Certificates regarding fumigation
  • Raw material analysis reports
  • Test certificates approving NACE MR0175
  • Heat treatment sketches
  • Material verifiability records
  • We present quality assurance plan(QAP)
  • Welding procedure qualification, procedure qualification report, WPQ/PQR

Tests we carry out (including both Destructive and Non-Destructive)

  • Positive material recognition
  • Mechanical examining like tensile, Elongation and reduction of area.
  • Large-scale test
  • Chemical examination-Spectro analysis
  • Firmness test
  • Pitting protection test
  • Hydrogen-effected cracking test approved by NACE TM0284
  • Small tests
  • X-ray test
  • Impact analysis
  • Eddy current examining
  • Hydrostatic analysis
  • Prompt test
  • Sulfide stress corrosion test approved by NACE TM 0177
  • Curve test

Packing

  • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
  • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
    • Shrink-wrapped
    • Carton boxes
    • Wooden pallets
    • Wooden boxes
    • Wooden crates

Marking

  • We mark all our products with entire details which are connected to the test certificates we provide.
  • In cases of orders like cut piece of pipes, sheets or round bars, the marking is shifted from the product from which it is slit. In these situations, we offer letter confirming the marking transfer and picture of the product from which it is cut.

Dispatching Time

  • In a situation, the stock is not ready, it depends on the size, quantity and grade for manufacturing.
  • We make sure that we provide at delivery time for everybody in India and most of the time our production time is the minimal.
  • We have secured with reliable logistic partners in India, which can carry out any kind of shipment activities and also without delay.
  • If the items are ready for use in stock, we take 2 days from the date of receipt of advance payment to discharge the shipment and send it to port.

Price-data

  • We are providing any of the following price basis as per your requirement
  • Past-works
  • Candidature delivery duty paid and unpaid as well
  • FOB Nhava Sheva
  • CFR, CIF, CPT your destination dockyard

Inspection

  • We accept stage wise investigation, final stage inspection for any of your legislator or third party inspection agencies
  • We systematically have inspections ongoing at our premises from various internationally acclaimed inspection Agencies like TUV, Llyods, BVIS, SGS, DNV and so on.

Extra information

  • We have a large collection of stock to accomplish your urgent requirements, still if any case it is not available, kindly not worry as we also provide small size/quantity orders, we hardly have minimum order quantity agreements
  • We provide pipes on cut to size basis, if your products require pipes of specific lengths, contact us without any hesitation.
  • Further, we also provide cutting pieces for plates and sheets. We can cut them as per requirement. We also cut circles and rings as per dimensions. The cutting is accomplished with water-jet, LaserJet and plasma technologies.

Manufacturers for whom we hold stock

We keep stock of manufacturers for pipes and tubes as per the countries like below

Argentina Siderca (Tenaris Group)
Austria Schoeller Bleckmann
France Europipe- GTS. Industries and Vallourec.
Germany Benteler, Europipe- Mannes, and Butting
International DMV stainless
Italy Dalmine (Tenaris Group) (Incorporating Tad Tubi)
Japan Nippon steel and Sumitomo Metal, NKK (Tenaris
Netherlands Van Leeuwen Buizen
South Korea Seah
Sweden Sandvik
United Kingdom Corus- British steel
USA Napa pipe Co.
We have Butt Weld and Forged Fittings and Flanges as per country

Austria Erne
France Delcorate
Germany Bebitz, Bruck Gmbh
Italy Melesi, Metalfar, Mega, Petrol Raccord, Raccordi Forgiati, and Ulma
Japan Benkan
Korea Kofco
Thailand Thai Benkan
United Kingdom BKL
Bebitz Germany

Products List